The Warden
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Exactly what it sounds like. (The upcoming scary minecraft mob)
- Rating
- 4.8 / 5
- Likes
- 239
- Downloads
- 1,573
- Makes
- 11
- Views
- 12,681
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
My take on the upcoming Minecraft warden mob. I wanted as many different colors and details as possible, but since I don't have an MMU, I had to get creative with the design. The resulting print is pretty small (roughly 12.5 cm tall), and there are A LOT of parts, but the result is sick.
Special thanks to DEVU (u/DevuXD) for his texture recreation of the warden which helped me model the back of the warden.
This model is also available on Thingiverse: https://www.thingiverse.com/thing:4800632/files
Assembly should be pretty straight forward, but if not, the following pictures should provide hints:
Tools Required: precision knife to clean off parts for better fit. Super glue can be useful if you want a more permanent connection.
NOTE: Every single model (stl) needs printed at least 1x. But the following files need printed multiple times:
MiniLeg Blue MT.stl (2x)
Mini Leg.stl (2x)
Mini Toes MT.stl (2x)
Arm Pivot -.1.stl (2x)
Leg Hinge B type 2 -.127 lower and upper.stl (2x)
StoneRib MT -.1.stl (8x)
Mini Blue Rib.stl (2x)
ALSO: be careful with fragile parts especially in the Arm segments.
ALSOx2: this thing might be a pain to print . . . good luck
The Legs: note that Left and Right are not identical.
The body cover: small parts push from the inside to the outside.
The two feet are identical:
