1 / 3
Hermione's Time Turner - with print in place rings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Time Turner from Harry Potter with print in place rings & hourglass printed in 2 halves
- Ocena
- 4,5 / 5
- Polubienia
- 66
- Pobrania
- 292
- Wydruki
- 2
- Wyświetlenia
- 1483
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (82)Powiązane
Time Turner with print in place mechanism
For printing, I used Prusa Mini and print my original model 125% over sized.
- Rings
- gold PLA filament
- support below the handlers
- 100% infill
- Inner disk
- gold PLA filament
- 70% infill
- Hourglass
- transparent PLA filament
- split in 2 halves, each half printed separately, to avoid stringing
- with a large brim
- 100% infill - you could also print 1 half with 0% infill so once assembled, one looks empty and the other looks filled with sand.
Assembly:
- Glue the 2 parts of the hourglass together
- Insert the hourglass in the disk
- Snap the disk in the inner ring - you can add glue to avoid the disk to spin inside the ring.
- Once all in place you can also glue the hourglass to the disk to avoid it moving around
The only additional part needed is a chain to complete the necklace.