1 / 3
Hermione's Time Turner - with print in place rings — image 1
1 / 3

Hermione's Time Turner - with print in place rings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Time Turner from Harry Potter with print in place rings & hourglass printed in 2 halves

Rating
4.5 / 5
Likes
66
Downloads
292
Makes
2
Views
1,483
Reviews
2

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Share Alike

Time Turner with print in place mechanism
 

For printing, I used Prusa Mini and print my original model 125% over sized.

  • Rings
    • gold PLA filament
    • support below the handlers
    • 100% infill
  • Inner disk
    • gold PLA filament
    • 70% infill
  • Hourglass
    • transparent PLA filament
    • split in 2 halves, each half printed separately, to avoid stringing
    • with a large brim
    • 100% infill - you could also print 1 half with 0% infill so once assembled, one looks empty and the other looks filled with sand.

Assembly:

  1. Glue the 2 parts of the hourglass together
  2. Insert the hourglass in the disk
  3. Snap the disk in the inner ring - you can add glue to avoid the disk to spin inside the ring.
  4. Once all in place you can also glue the hourglass to the disk to avoid it moving around

 

The only additional part needed is a chain to complete the necklace.

Tags