08005 Front Lower Suspension Arm (e.g. for Amewi Terminator Pro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for various Monster Truck RC cars.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement front lower suspension arm for Amewi Terminator Pro Monster Truck.
This is the part that usually breaks when you hit a curb with your front wheel. Its official replacement part number is 08005. It fits my Amewi Terminator Pro, but there are many compatible Monster Trucks out there, and the part is often described as “HSP 08005 Front Lower Suspension Arm”.
This is not an easy print. You should be using PETG and print it standing upright for full strength. Choose 100% infill and print on a raft with snug supports. Be careful while removing the supports in the “holes”. Print at rather higher temperatures and turn down the cooling for best material fusion. When you break the printed part, it should not have breaked across layer boundaries.