1 / 6
Connect Four Cooler Master Design
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have designed my own version of connect four to be used on the Cooler Master
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
I started my model about ten days ago. Unfortunately, many others had the same idea. I hope everyone likes my setup. I have included all the files needed and even did a test print.
I have drawn the clips on my models so it clips right into the Cooler Master side plate. The total printing time was around 39 hours for everything. I used a .28 layer and tree supports for the main body. I have included one chip to be printed. You can of course multiply these in the slicer.