Bird Buddy full coverage picket fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picket fence that covers the entire sides and there is an optional cutout on the right side for a suet ball holder.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 226
- Wydruki
- 2
- Wyświetlenia
- 881
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
Prevents birds from picking food from the sides of the Bird Buddy, where they wouldn't be seen on the camera. With the lower picket fence this design is based on, I noticed especially larger birds would often just eat from the sides.
Additionally, there is also a version that includes a cutout that allows you to simultaneously use a suet ball holder on the right side.
Simply mount using an M5 screw on both sides. If you decide to use a suet ball holder, make sure to install the fence first and then put the fence on first.
Prints nicely in PLA, PETG, and PC without supports at a layer height of 0.20 mm in the default model orientation.
If you like what I'm doing, please give it a like 👍 consider joining my club or buying me a coffee! 😃👍
