Liczymy pasujące modele…
Suet balls normally come in green nets that are not great for the environment The lid has holes to hang it from a rope or chain. When it needs to be refilled it can be unscrewed and filled. Printing I recommend to print the 3 parts…
Suet Ball holder for Bird Buddy. No supports required! I designed this suet ball feeder to have several important features: Tough--birds can be pretty rough when they are going after food, and I wanted something that would hold up to…
Bird feeder for fat/suet blocks. Maximum dimensions of block 116x38x100mm, this should feed the majority of commercial fat blocks. The photos are of the feeder printed in PLA, after 1 year outside the roof has warped slightly although the…
Simple hand scraper or putty knife for all your scraping needs. Hand sized with a 20 degree edge. Easy to print, with 0.20 mm layers working just fine. Meant to be used with standard suet cubes, to chop them into manageable quarters…
Open and closed topped suet ball holders for Bird Buddy bird feeders. Has a through hole and counter bore for and M5 screw to attach to the standard bird buddy location on the platform. This suet ball holder is printable without supports.…
I recently made some mounts for suet balls to avoid using the still often sold suetballs with a net around them. Those nets are really dangerous for small birds (risk of entangling) and produce even more plastic waste. Our birds need…
A simple (and modular) suet ball feeder for small birds that can be easily hung up. The idea for the design basically came from Danko79 , but I completely redesigned the feeder. 🐦 I left the center piece separate; the top and bottom parts…
I like the design of the suet ball holder by @ivyMike , as his design allows to feed fatballs to the birds without the commonly used nets around the suet ball. Those nets are dangerous for small birds and unnecessary waste. So it is good…
Fat Ball Feeder This fat ball holder comes in handy, especially on colder days when birds have more difficulty finding food. The biggest advantage of this product is that it is animal-friendly. In case you didn't know yet, birds can get…
I liked the design of the original Voronoi Suet Bird Feeder by Ian Foulds, but the webbing was too delicate to withstand the birds in my area and I wanted to make a couple tweaks for easier printing. The way I thickened it is pretty hacky…
Simple open cup to hold 2.5" suet balls. I used a M5 heat set insert in the bottom and a 20mm M4 stainless steel bolt for the mounting hardware. Supports needed. For Cura, I used “Normal” and “Touching Buildplate”.
Redesign of the Bird Buddy Picket Fence from Willis Works (@WillisWorks) to fit with the original suet ball holder.
This is a suet feeder that holds the bricks that my wife buys for feeding the birds. It can be printed unsupported, (at least my Mark 4 can). For those interested in the design process. In Fusion 360 I built the model in two parts a body…
A tail prop that can be attached to a suet feeder. It provides larger woodpeckers with a place to rest their tail feathers to improve their balance while they are on the feeder. No supports or additional hardware needed. Print with PETG…
Intro: This is a large capacity bird feeder. It is modeled after a popular wooden one that has an interior chamber for seeds and baskets for suet. Magnets are currently required if using the suet baskets. Magnets are optional for the…
Squirrels ran away with the top to my original Bird Buddy suet ball holder, quite possibly because the original was a bit too snug on the size suet balls I was able to purchase. This is my second attempt at modelling a replacement, but…
Birdy Suet Ball holder, like the one from the Birdfy Pro accessories kit. Redesigned to use a push to snap in, rather than a twist lock (which is hard to print and gets clogged with suet after a while). Print with supports. Put your suet…
I liked the design of the suet ball holder by @ivyMike , as his design allows to feed fat to the birds without the commonly used net around the suet ball. Those nets are dangerous for small birds an. d unnecessary waste. So it is good if…
I designed this to mold our homemade “suet” for feeding the wild birds. It is printed in vase mode. We found that lining the mold with plastic wrap keeps it clean and reduces the mess when transferring it to and from the freezer where it…
Simple attrition for suet feeders. it allows the birds easier access by providing tail support for birds that feed from the feeder. Black PETG works well to blend in with the background. I used M4 screw and bolt to attach the pieces. I…
Current designs lacked mounting place for suet ball mounting hole. This does all 3 now. Printed from PETG at 35% infill. I used stainless steel screws and deleted plastic screws. Link to large suet ball holder in comments.
The Suet Bird Food Seed Bell Mold is a simple mold that can be used to make custom homemade suet bird food. Featuring a simple bell-shaped curve, this one-piece mold makes suet bells compatible with most cages designed for conical or…
This bolt-on addition to a cage-style suet feeder gives woodpeckers and other birds something to lean their tails against. There are decorative reliefs of two birds cut into the sides. When printed in two or there colors, these inlays…
Birdy Suet Ball holder, like the one from the Birdfy Pro accessories kit. Put your suet in there and woodpeckers will come eat it. Print with supports and be careful to clean them off completely so the twist lock works. Recommended: PETG…
The Suet Bird Food Seed Square Mold is a simple mold for making custom-made suet bird food. Featuring a simple square(ish) shape with filleted edges and a separate base insert similar to fluted apple tart pans, this two-piece mold makes…
This is a horizontal suet feeder for wild birds. It has the words "Live, Tweet, Love" on one side and "Bless this Dish" on the other. We printed this in blue PLA, and used a yellow paint marker to highlight the words.
Nothing special here. I printed in PLA on my Snapmaker 2.0 without supports. I plan to add a space for a set screw on the side of the post mounting item.
I recently purchased a Nature's Way Birds Cedar Hopper Bird Feeder. Unfortunately already 2 birds got stuck in the suet cages because their product doesn't come with a lid / top mesh to close the cages as most do. The first bird didn't…
Every year we try to provide food to some of the many birds holding out the cold winter of Norway. We use birdfeeders for seeds together with seed balls hung from branches. The latter poses a bit of a challenge though: You either have to…
Simplified Suet Ball / Cube for the Birdfy Pro set. It's a simple cube suet cage. Just big enough for a quarter of a standard sized suet refill. No need to get your hands dirty, just cut off a quarter or two and stack them into the cage.…
Was designing a suet holder with a key latch to hold shut. Unique feature is the integral swivel latch which allows printing a strong latch key directly from the build surface and then lets the key rotate into position. The swivel joint…
Simplified Suet Cube for the Birdfy Pro set. It's a simple cube suet cage. Just big enough for a quarter of a standard sized suet refill. No need to get your hands dirty, just cut off a quarter or two and stack them into the cage. The top…
my wife wanted to get some Suet bird feed, but we didnt have a feeder. since she's let me procure more filament lately, she asked that i make her a feeder. planning to print in HS-PETG / Rapid PETG filament since it will be outside.…
Krmítko pro ptáky na lojové kuličky – oproti originálu bylo přidáno uchycení na plotový sloupek. K dispozici jsou dvě velikosti – originální a o něco menší, aby bylo možné jej vytisknout na Prusa mini. Bird feeder for suet balls –…
After printing the original, we realized the hooks were just a few millimeters too tight when at its widest position. I made modifications to the two hook models in OrcaSlicer to give a little extra clearance for hooking on to our suet…
The original (v2) model worked great for our first suet feeder after making some alternate hooks for the larger size. Our other feeder uses a different design with two thicker wires on the bottom instead of one. Additionally, the hooks…
An easy 3D-printed suet / salo holder for winter birds! Designed as a hanging feeder, it securely holds the food while allowing easy swapping when it's empty Design consists of two plates, one of which easily slides off to refill the food…
A unique 3D printable creation — this Suet Cake Cage Holder, Hangs From Branch, Woodpecker Feeder, Wire Frame Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
Krmítko pro ptáky na lojové kuličky – oproti originálu bylo přidáno uchycení na plotový sloupek. K dispozici jsou dvě velikosti – originální a o něco menší, aby bylo možné jej vytisknout na Prusa mini. Bird feeder for suet balls –…
This is a bird feeder for 2-3 suet balls with a diameter of 50 to 60 mm. The lid and the housing have a thread so that they can be screwed together. There is a slot in the cover for a rope to hang the bird feeder from a tree or other…
An easy 3D-printed suet / salo holder for winter birds! Designed as a hanging feeder, it securely holds the food while allowing easy swapping when it's empty Design consists of two plates, one of which easily slides off to refill the food…
Suet ball holder for the Bird Buddy smart bird feeder. Suitable (suet-able) for larger pre-made suet balls (about 6cm or 2.25 - 2.5 inches) (I use Jacobi Jayne Chunky Dumplings ones https://amzn.to/3lsqUnR ) which seem to be larger than…
I wanted to make my own suet cakes to feed the birds in my yard. (The bird feeding area is like TV for my cats.) I searched online for a suet mold and I could only find one that doesn't seem to be being made anymore, and the few places I…
