XY6020L enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for XY6020L DC Voltage converter
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 235
- Wydruki
- 2
- Wyświetlenia
- 2046
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I created a basic housing model for the XY6020L DC-DC converter. I came across the XY6020L adapter on the GreatScott! YouTube channel and decided to get one.
don't have a home lab, so having a portable housing for the device is incredibly useful for me, especially when I need the converter to trickle charge a car battery for a couple of days
BOM
Attaching the board to the tray:
4x M3x10mm bolts
4x M3 Nuts
Attaching the tray to the housing
4x M2x6mm bolts
4x M2 nuts
Print Settings
Minimum print settings: 15% infill and 2 layers everywhere. This will result in something workable.
Use more top and bottom layers to improve part quality.
Revision 1
Clips holding M2 nuts are now connected to the bottom of the tray, and not hanging off the alignment lip. Thank you @[email protected]