XY6020L enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for XY6020L DC Voltage converter
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 235
- Makes
- 2
- Views
- 2,046
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I created a basic housing model for the XY6020L DC-DC converter. I came across the XY6020L adapter on the GreatScott! YouTube channel and decided to get one.
don't have a home lab, so having a portable housing for the device is incredibly useful for me, especially when I need the converter to trickle charge a car battery for a couple of days
BOM
Attaching the board to the tray:
4x M3x10mm bolts
4x M3 Nuts
Attaching the tray to the housing
4x M2x6mm bolts
4x M2 nuts
Print Settings
Minimum print settings: 15% infill and 2 layers everywhere. This will result in something workable.
Use more top and bottom layers to improve part quality.
Revision 1
Clips holding M2 nuts are now connected to the bottom of the tray, and not hanging off the alignment lip. Thank you @[email protected]