Wall mounted keys and masks hook*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted keys and masks hook* '* and for everything else, as you like :) I needed a small hook next to my door to…
- Ocena
- 4,714 / 5
- Polubienia
- 130
- Pobrania
- 499
- Wydruki
- 7
- Wyświetlenia
- 3060
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mounted keys and masks hook*
'* and for everything else, as you like :)
I needed a small hook next to my door to organise my keys and the arduous mask. I saw something similar on Am*zon for jackets.
Mounting Video:
There are 3 parts:
1)KeyMaskHolder_Template.stl => use this to align the screws, screw them in the wall so that the template can be removed with a slight bit of resistance
2)KeyMaskHolder_Base.stl => The main part
3)KeyMaskHolder_Peg.stl => The pegs, slide them in from the bottom. They should fit very tight.You need 5 pegs
2 Screws are required (I used 3,5 x 20 Screws, flat head)
Notes:
Printed with 3 perimeter
Post-Printing
Step 1
Instert the Pegs from below. Some litte force is needed ;)
Step 2
Use the template to find the desired position. Screw the screws in, assure they have a tight fit. Thereafter remove the template
Step 3
Slide the hey hook onto the screws