1 / 6
Cast wheel cap (57mm) with Toyota logo and spring replacement — zdjęcie 1
1 / 6

Cast wheel cap (57mm) with Toyota logo and spring replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wheel cap (57 mm) with 5 wings and plastic spring and wing to fix original cap (need to glue it in the 2mm deep notch)

Ocena
0 / 5
Polubienia
9
Pobrania
87
Wydruki
0
Wyświetlenia
635
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

A wheel cap on my Toyota got broken wing and lost wire spring. First I've made a whole cap with 5 wings and replacement for spring, but after all repaired an original cap by adding of 3 extra wings to remained 2 + spring made with PETG. Wings was glued (epoxy) in the 2 mm deep notches made by dremel.

Tagi