120mm Filter Block for Creality Enderplus 3D / Elegoo Neptune Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
120mm Filter Block for Creality Enderplus 3D / Elegoo Neptune Enclosure
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 58
- Wydruki
- 3
- Wyświetlenia
- 685
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I bought an enclosure for my 3d printer on amazon (Enclosure Name: Creality Enderplus 3D Printer Enclosure 550mm x 650mm x 750mm) . This enclosure fits perfectly my Neptune 4 Pro and I decided to design a filtration block for it to reduce plastic smell and fumes, I'm not printing anything more toxic than PLA/PLA+ so I think this solution is good enough. It has a compartment where you can fit 120mm fan (Noctua NF-F12 5V in my case) and replaceable filter (I found one with perfect size and activated carbon inside: Hunter F1715HE5 HEPA Replaceement Air Filter). The holes in the model have 2.5mm diameter but because of slight overextrusion on inside walls the printed holes have a dimeter around 2.1mm for me. So you would need 2.5x8mm or 3x8mm screws depending on precision of your printer.