100mm ducting to dunnage bag adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to allow dunnage bags to be inflated from (eg) bouncy-castle blowers via 100mm flexible ducting
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Dunnage bags are usually inflated with an adapter that take high-pressure air from a compressor and converts it to high-volume low-pressure air.
This adapter is useful when you have a supply of low-pressure high-volume air (eg from a bouncy castle blower) instead.
There's also a tool to let you open the built-in valve in the dunnage bag.
Only tested one one brand of bag, from Exporta.
Assembly requires a cable tie to hold the latch parts onto their pivots (don't do it up too tight) and a rubber band or loop of bungee to hold the latch closed. You also need 4 short self-tappers to hold the spigot into the adapter.