100mm ducting to dunnage bag adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to allow dunnage bags to be inflated from (eg) bouncy-castle blowers via 100mm flexible ducting
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Dunnage bags are usually inflated with an adapter that take high-pressure air from a compressor and converts it to high-volume low-pressure air.
This adapter is useful when you have a supply of low-pressure high-volume air (eg from a bouncy castle blower) instead.
There's also a tool to let you open the built-in valve in the dunnage bag.
Only tested one one brand of bag, from Exporta.
Assembly requires a cable tie to hold the latch parts onto their pivots (don't do it up too tight) and a rubber band or loop of bungee to hold the latch closed. You also need 4 short self-tappers to hold the spigot into the adapter.