Solder Flux Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Luer lock attachment to dispense small amounts of solder flux.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a way to dispense small amounts of solder flux, since the smallest syringe being sold is 10mL, and even a gentle press of the plunger releases huge amounts. I did manage to transfer flux from 10mL to a 3mL syringe using this adapter but found the plunger to be still way too sensitive:
https://www.printables.com/model/599583-luer-adapter
My wife had purchased this five-pen set on Amazon:
https://www.amazon.ca/dp/B075R28129
She only needed a couple and was willing to share. It's a twist pen for dispensing lip gloss and such. The twist mechanism is capable of dispensing tiny amounts.
The adapter has a very snug fit over the pen, and accepts Luer lock needles and tips.
Printed in PLA+ with 100% infill. I ended up using Cura since Orcaslicer was giving me grief over non-manifold (not watertight) bodies on the Luer lock section. I tried using both STL and STEP files provided by wavexx but had no luck with either. Somehow Cura is more forgiving.