Bicycle bearing press set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable bearing press kit for the most common bearings in bikes (and some less common one's).
- Ocena
- 5 / 5
- Polubienia
- 144
- Pobrania
- 784
- Wydruki
- 1
- Wyświetlenia
- 4313
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to replace bearings more and more often, and found the proper tools way to expensive. So i bought the press handle from WheelsMFG and printed my own adapters.
If you don't want to buy the (still expensive) tools from WheelsMFG i believe a M10 threaded bar and some washers and nuts should also work. (if you try this please let me know)
My adapters are printed in red PETG with 50% infill to achieve proper strength.
The letters were filled in with nail polish. See video for tutorial.
I also made a plate to hold all of my adapters. The plate fits in a regular “eurocrate” of 40X30.
For this no designs are available (yet), but you might be able to make one based of the pictures.
Parts Used:
-Hub Bearing Press Essential Kit (This one)
-Adjustable press stop mini (This one)
-A little over half a kilo of red PETG
-White nailpolish
-Some black PETG (for the standoff pins)
-Wooden plate
-Eurocrate 40*30
-Webbing for handles on the plate
-(51?) screws