1 / 1
Wallmount 12v holder for Bosch, Milwaukee and Parkside batteries
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds several brands of 12V battery
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 324
- Wydruki
- 2
- Wyświetlenia
- 1616
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (1)Kolekcje (46)Powiązane
Holds Bosch, Milwaukee and Parkside 12V batteries. Takes two 4x35mm screws, assuming 30mm depth wall plugs.
Battery clips in for retention. It is possible to pull the battery out without pressing the release since the underside of the clips have a slight slope to allow printing without supports. It certainly takes the weight of an extended 4Ah battery whilst upside down though.
Also reported to be compatible with AC Delco/Earthquake 12v batteries.