1 / 1
Dyson Narrow Nozzle 10x36mm (v7 and later)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10x36mm narrow nozzle for the Dyson vx hand vacuum series. Fits models v7 and later.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 415
- Wydruki
- 7
- Wyświetlenia
- 1417
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 7)Remiksy (1)Kolekcje (94)Powiązane
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or similar instead of PLA for a longer lasting model.
Fits models v7 and later.