Fully printed ESPuino Radio for Kids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully printed RFID based radio case
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1001
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 08.04.24: I added another back cover with a hardware switch for traveling.
Original:
A fully printed case for the ESPuino radio project.
The radio has an integrated 6000mAh battery and is charged via USB-C. I had to file down the buttonholes on top to get everything smooth, otherwise the buttons got stuck from time to time. I covered the radio in double-sided tape and added felt for a softer appearance. The radio on the images is 5 months in use. The Radio is ~ 16x8x10 cm without buttons.
Special thanks to biologist from the ESPuino community
https://github.com/biologist79/ESPuino
Here is a link to the Fusion360 design: https://a360.co/3FbVJUk
Part list for the radio (mostly from Germany):
https://forum.espuino.de/t/esp32-develboard-d32-pro-lifepo4/1109
https://forum.espuino.de/t/espuino-mini-4layer/1661
https://forum.espuino.de/t/kopfhoererplatine-basierend-auf-ms6324-und-tda1308/1099
https://www.eremit.de/p/3-2v-6000mah-pack-mit-schutz-arduino-aio-spezial-jst-ph-2-0-stecker
https://de.aliexpress.com/item/32787336145.html (16 bit led ring)
https://de.aliexpress.com/item/1005003439708042.html
https://de.aliexpress.com/item/4000990441205.html
https://www.pollin.de/p/visaton-breitbandlautsprecher-fr-7-5-w-4-o-640988
https://www.pollin.de/p/printtaster-8-mm-2-polig-wechsler-421041
Micro-SD card
Screws (I used 2.9x6.5 metal screws)
Felt