1 / 3
Fully printed ESPuino Radio for Kids — image 1
1 / 3

Fully printed ESPuino Radio for Kids

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A fully printed RFID based radio case

Rating
0 / 5
Likes
11
Downloads
53
Makes
0
Views
1,012
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Update 08.04.24: I added another back cover with a hardware switch for traveling.

Original:

A fully printed case for the ESPuino radio project.

The radio has an integrated 6000mAh battery and is charged via USB-C. I had to file down the buttonholes on top to get everything smooth, otherwise the buttons got stuck from time to time. I covered the radio in double-sided tape and added felt for a softer appearance. The radio on the images is 5 months in use. The Radio is ~ 16x8x10 cm without buttons. 

Special thanks to biologist from the ESPuino community

https://forum.espuino.de/

https://github.com/biologist79/ESPuino

Here is a link to the Fusion360 design: https://a360.co/3FbVJUk

 

Part list for the radio (mostly from Germany):

https://forum.espuino.de/t/esp32-develboard-d32-pro-lifepo4/1109

https://forum.espuino.de/t/espuino-mini-4layer/1661

https://forum.espuino.de/t/kopfhoererplatine-basierend-auf-ms6324-und-tda1308/1099

https://www.eremit.de/p/3-2v-6000mah-pack-mit-schutz-arduino-aio-spezial-jst-ph-2-0-stecker

https://de.aliexpress.com/item/32787336145.html (16 bit led ring)

https://de.aliexpress.com/item/1005003439708042.html

https://de.aliexpress.com/item/4000990441205.html

https://www.pollin.de/p/visaton-breitbandlautsprecher-fr-7-5-w-4-o-640988

https://www.pollin.de/p/printtaster-8-mm-2-polig-wechsler-421041

Micro-SD card

Screws (I used 2.9x6.5 metal screws)

Felt

Tags