IKEA BROR frontal filament spool mount (Filler adapter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BROR is great for storing 3d printers.... but may be even better. You can mount filament spool on the shelving unit
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model allows to mount Filler on front of IKEA BROR shelving unit in both directions. There's no left/right version so it's easy to switch to other mount point. You will need two screws and nuts to mount it (designed for M5). This is usefull for larger or enclosed printers. For smaller printers or if you have more space check this one https://www.printables.com/model/342558-ikea-bror-filament-spool-mount-filler-adapter
Print it using thick walls and some extra infill. PLA if layer adhesion is ok should be enough
