Silicone, sock, mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better silicone sock ed3 v6
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Better sock mold for E3D V6 hot end using JB Weld RTV, red high temp red silicone gasket maker 288 degree C Constant working temperature 344 degrees C max. For higher temperature use the JB weld RTV copper its constant working temperature is 344 degrees C max temp 371 degrees C. 0.2mm layer height no supports. You'll need between 6 to 8 g of silicone per sock. 1g = 1ml
https://a.co/d/06utsRx - red 7$
https://a.co/d/aOz8zQX - copper 13$
You'll need 1 x 30 mm M3 screw and 2 x 35 mm m3 screws and 3 x m3 nuts and a catheter tips syringe
https://a.co/d/2ND8LEv - syringe
You might be able to get away with just using rubber bands not tested.
I just cut two small slits to fit around the wires and didn't cut it like the regular silicone sock molds
Different mold, same process