Silicone, sock, mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Better silicone sock ed3 v6
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 68
- Makes
- 0
- Views
- 1,308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Better sock mold for E3D V6 hot end using JB Weld RTV, red high temp red silicone gasket maker 288 degree C Constant working temperature 344 degrees C max. For higher temperature use the JB weld RTV copper its constant working temperature is 344 degrees C max temp 371 degrees C. 0.2mm layer height no supports. You'll need between 6 to 8 g of silicone per sock. 1g = 1ml
https://a.co/d/06utsRx - red 7$
https://a.co/d/aOz8zQX - copper 13$
You'll need 1 x 30 mm M3 screw and 2 x 35 mm m3 screws and 3 x m3 nuts and a catheter tips syringe
https://a.co/d/2ND8LEv - syringe
You might be able to get away with just using rubber bands not tested.
I just cut two small slits to fit around the wires and didn't cut it like the regular silicone sock molds
Different mold, same process