1 / 4
Leica style Lens Hood — zdjęcie 1
1 / 4

Leica style Lens Hood

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Leica Style lens hood designed to fit where the filter would go on a lens.

Ocena
4 / 5
Polubienia
25
Pobrania
193
Wydruki
2
Wyświetlenia
1256
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

Leica Style lens hood designed to fit where the filter would go on a lens. You can also put it on a filter that has the extended part for adding other filters on it and it was tested with multiple lenses, there is no vignetting. Its supposed to be a perfect fit, if you try to screw it in like a filter the thread on the lens will grab on it and it will not fall off.

Printed with 0.1 layer height on Ender 3 Pro. The pictures you see are the results of sanding them for like 5-10 minutes with 400 then 600 grit sandpaper.

Let me know if there is any diameter you need this to fit and i will modify and upload the files for it.

Tagi