Modular Bookend with adjustable stands Print in place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Separate movable triangles will create individual sections for your book collection
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 743
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular Bookend with adjustable stands.
Each book, manga, CD or whatever will be held straight very easily by the little triangles, which automatically create individual sections for whatever you place in it.
Everything is printed in place, so the print requires good accuracy and flow calibration, so make sure that your 3D printer is well adjusted.
Notice: Pay attention on strong and firm support structures with good layer adhesion. In many testprints the supports got loose and caused fails.
Use brims that are wide enough. I also printed the Support trees with 2 walls, so they got more stable.