1 / 11
Umbrella Tip Replacement — zdjęcie 1
1 / 11

Umbrella Tip Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,67 € – 0,81 € netto (bez VAT)

Dla pliku: umbrella_tips_0.4n_0.2mmQ_PETG_MK4_52m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,74 € netto (środek widełek).

Masa podana przez autora
7 g
Czas druku podany przez autora
52,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This is a replacement part for repairing the tip of the umbrella. Compatible with umbrellas with UNC1/4 screws.

Ocena
0 / 5
Polubienia
8
Pobrania
38
Wydruki
0
Wyświetlenia
291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a replacement part for repairing the tip of the umbrella.

As long as the tip of the umbrella has a UNC1/4 screw, it will fit any manufacturer or model.

 

Show off your individuality by adding your own original design.
 

Even users who are not familiar with CAD can create original designs.
 

Find a design you like and use PrusaSlicer's merge function to create your own original umbrella. 

*The Josef umbrella in the sample photo is a combination of the model published by Prusa Research. This model is not included.
 

■base design

For the merge function of PrusaSlicer.

2 types of screw lengths and 2 types of diameters.

  • Tripod_screw_dummy_D10mm_xH14mm.stl
  • Tripod_screw_dummy_D10mm_xH7mm.stl
  • Tripod_screw_dummy_D8mm_xH14mm.stl
  • Tripod_screw_dummy_D8mmxH7mm.stl

- Merge manual

Step1:  Load the model you want to combine into PrusaSlicer.

Step2:  Load the above screw parts into PrusaSlicer.

Step3: Lower the screw parts by the height.

Step4: Merge all parts.

Step5: Restore height, add supports as needed, and print.

 

■sample design

- Basic design

2 types of screw lengths.

  • umbrella_tip_basic_H6mm.stl
  • umbrella_tip_basic_H13mm.stl
  • umbrella_tip_basic_withHole_H6mm.stl
  • umbrella_tip_basic_withHole_H13mm.stl

 

- Unique design

  • umbrella_tip_star.stl
  • umbrella_tip_sphere.stl
  • umbrella_tip_sphere_smile.stl

 

■Notes on printing

If you are concerned about strength, it is better to have a circumference of 4 or more.

Print with ABS or PETG.

Tagi