Umbrella Tip Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.67 – €0.81 net (excluding VAT)
For file: umbrella_tips_0.4n_0.2mmQ_PETG_MK4_52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.74 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 52.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a replacement part for repairing the tip of the umbrella. Compatible with umbrellas with UNC1/4 screws.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a replacement part for repairing the tip of the umbrella.
As long as the tip of the umbrella has a UNC1/4 screw, it will fit any manufacturer or model.
Show off your individuality by adding your own original design.
Even users who are not familiar with CAD can create original designs.
Find a design you like and use PrusaSlicer's merge function to create your own original umbrella.
*The Josef umbrella in the sample photo is a combination of the model published by Prusa Research. This model is not included.
■base design
For the merge function of PrusaSlicer.
2 types of screw lengths and 2 types of diameters.
- Tripod_screw_dummy_D10mm_xH14mm.stl
- Tripod_screw_dummy_D10mm_xH7mm.stl
- Tripod_screw_dummy_D8mm_xH14mm.stl
- Tripod_screw_dummy_D8mmxH7mm.stl
- Merge manual
Step1: Load the model you want to combine into PrusaSlicer.

Step2: Load the above screw parts into PrusaSlicer.

Step3: Lower the screw parts by the height.

Step4: Merge all parts.

Step5: Restore height, add supports as needed, and print.

■sample design
- Basic design
2 types of screw lengths.
- umbrella_tip_basic_H6mm.stl
- umbrella_tip_basic_H13mm.stl
- umbrella_tip_basic_withHole_H6mm.stl
- umbrella_tip_basic_withHole_H13mm.stl
- Unique design
- umbrella_tip_star.stl
- umbrella_tip_sphere.stl
- umbrella_tip_sphere_smile.stl
■Notes on printing
If you are concerned about strength, it is better to have a circumference of 4 or more.
Print with ABS or PETG.