1 / 2
Halo Magnum Nerf Bigshock Rear Load Inline Mag Mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a combination of ArchetypeMonsters's Bigshock Halo Magnum Mod and SomeDingus's Rear Load Inline Mag Mod.
- Ocena
- 0 / 5
- Polubienia
- 90
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 2236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (108)Powiązane
This mod converts your Nerf Mega Bigshock into a 4 short-dart capacity Halo Magnum pistol that you load from the rear. There is some shellcutting required but keep the original screws as you can use them to screw the two halfes together.
To make this you also need:
- A piece of of 17/32" brass barrel to help with airtightness (I used 2,5 cm)
- An o-ring (I used: outer diameter 10,7 mm; inner diameter 7,1 mm; RO-5)
- These Models from SomeDingus: Mega_Bigshock_Breech.stl; Mega_Inline_Brass_4rd.stl
- Glue to glue in the brass barrel
- Grease to grease the o-ring
I also recommend adding Mega_Bigshock_Primer_Extension.stl from SomeDingus and the NERF MEGA Jolt Grip Cover by NK66.