1 / 2
Halo Magnum Nerf Bigshock Rear Load Inline Mag Mod — image 1
1 / 2

Halo Magnum Nerf Bigshock Rear Load Inline Mag Mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a combination of ArchetypeMonsters's Bigshock Halo Magnum Mod and SomeDingus's Rear Load Inline Mag Mod.

Rating
0 / 5
Likes
90
Downloads
128
Makes
0
Views
2,236
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This mod converts your Nerf Mega Bigshock into a 4 short-dart capacity Halo Magnum pistol that you load from the rear. There is some shellcutting required but keep the original screws as you can use them to screw the two halfes together.

To make this you also need:

  • A piece of of 17/32" brass barrel to help with airtightness (I used 2,5 cm)
  • An o-ring (I used: outer diameter 10,7 mm; inner diameter 7,1 mm; RO-5)
  • These Models from SomeDingus: Mega_Bigshock_Breech.stl; Mega_Inline_Brass_4rd.stl
  • Glue to glue in the brass barrel
  • Grease to grease the o-ring

I also recommend adding Mega_Bigshock_Primer_Extension.stl from SomeDingus and the NERF MEGA Jolt Grip Cover by NK66.

Tags