Maker Coin for FRC Team 5347
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this coin so we could give it out during competitions. This was designed for the First Robotics Team 5347 "The…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
I made this coin so we could give it out during competitions. This was designed for the First Robotics Team 5347 "The Gryphons".
I print these at 75mm (or around 3in) in diameter. The photo shows a .3mm layer height and that seems too low
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
10%
Notes:
I think that these are too low quality, I'm going to print at .2mm layer height in the future.
Also, if you want to make sure that your printer doesn't shake like crazy, use a concentric external infill.
How I Designed This
Inspiration
I followed Maker's Muse's tutorial and The 3D Printing Nerd's video as well. The design was inspired by Steampunk gears. Links to the video are down below.
I used this video for the coin design.
I used this video to see how he got text to print well and what size he printed it at to get the right results.
Category: Coins & Badges