Spinning Lollipop - a fun little stim toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The spinning Lollipop. It's a toy that basically works like a fidget spinner. Great for keeping your hands busy :)
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 287
- Wydruki
- 2
- Wyświetlenia
- 2281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: I made the parts stronger so they wont break that easy :)
Should be easy to print but you need a good first layer and your flow should be correct.
Elephant foots or overextrusion can cause it to jam.
If you have trouble with that, I added a slightly slimmer axis that might work for you.
Layerhigh 0,2mm
No supports needed
I recommend printing without brim
For assembly start with the top part and glue it to the axis. Next comes part 1a, followed by the numbers from 2 to 17 and back to 2, followed by part 1b, all put on loosely and facing to the top part.
So you will need parts 2-16 twice for the lollipop shape.
Last just add the bottom part with a bit of glue to the axis and make sure to leave a bit space between all parts so they can spin freely.
I hope it works well for you and I would love to see a make of this :)