Spinning Lollipop - a fun little stim toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The spinning Lollipop. It's a toy that basically works like a fidget spinner. Great for keeping your hands busy :)
- Rating
- 0 / 5
- Likes
- 72
- Downloads
- 287
- Makes
- 2
- Views
- 2,281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: I made the parts stronger so they wont break that easy :)
Should be easy to print but you need a good first layer and your flow should be correct.
Elephant foots or overextrusion can cause it to jam.
If you have trouble with that, I added a slightly slimmer axis that might work for you.
Layerhigh 0,2mm
No supports needed
I recommend printing without brim
For assembly start with the top part and glue it to the axis. Next comes part 1a, followed by the numbers from 2 to 17 and back to 2, followed by part 1b, all put on loosely and facing to the top part.
So you will need parts 2-16 twice for the lollipop shape.
Last just add the bottom part with a bit of glue to the axis and make sure to leave a bit space between all parts so they can spin freely.
I hope it works well for you and I would love to see a make of this :)