1 / 3
60mm cotton pad holder for Ikea Platsa cabinet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by Chrizzly' cotton pad dispenser (https://www.thingiverse.com/thing:3575562) Designed to fit the hole…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 1150
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (90)Powiązane
Inspired by Chrizzly' cotton pad dispenser (https://www.thingiverse.com/thing:3575562)
Designed to fit the hole pattern in the Ikea Platsa cabinets. The holes are off-center, so there is one version for each side.
Printed in PLA, 0.2 layer height, 15% infill, supports only for the lower part - if not you will print in mid-air.
Holes are fitted for 4mm countersunk wood screws.
Update 03.01.20
Added left side version