Aventon Level.2 Kryptonite U-lock mount adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
allows you to mount a Kryptonite U-Lock to the seat tube of an Aventon Level.2
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Motivation
The U-lock mount that comes with the Kryptonite kit isn't very secure – it works best with round tubes, which the Aventon Level.2 doesn't really have.
Therefore, I created this instead, for which you can scavenge parts from the Kryptonite mount to mount the lock to the seat tube.
Rev 7
Tested over about 9 miles, seemed sturdy enough.
Hardware
to clamp the mount to the seat tube
Quantity 3 M5 x 14 mm
Quantity 3 M5 regular nuts or lock nuts
lock interface
Quantity 3 M5 thin jam nuts
Quantity 3 M5x10 mm for the lock interface
to clamp the Kryptonite part to the mount
Quantity one m4 lock nut
Quantity one m4x14 mm socket head cap screw
you will need a Kryptonite part which actually interfaces with the lock
2023-10-21 future improvements
I'm abandoning this project in favor of a better mount for my bike. If I were to continue, I would:
deepen the M4 locknut recess
reinforce the recess – it was bulging out under high torque
consider printing a variant with the lock fully horizontal rather than vertical, & parallel to the midplane of the bike