Liczymy pasujące modele…
Update: November 15th 2025 - Tested it with the Tern Sun & Rain Shield and it works just fine. Pictures at the end. If you enjoy this model, please consider making a donation to familybikeride.org. I made this to help families get on an…
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
I designed this printable chainstay protector for my Aventon Level 2 e-bike because the bike does not come with one. After just two rides, I noticed that the chain was damaging the paint on the chainstay. The Aventon Level 2 has a very…
Display case I made for an aventon ebike, this specific display is called the BC280 on their website. No supports needed for print, only tried installing on the bike with a tpu printed version, you can try something stiffer but that has…
A Seatpost cover for my Aventon Mataro so that the standard Seatpost fits better to the aero shape of my bike frame. perintet fron regular pla
Its not perfect, but it works. I have included the STEP Files so you may make changes at your own leisure.
I designed this to mount the Bryton Gardia radar/light to the rear rack of the Aventon Aventure v2. Needs 4 M3 x 5mm heat set inserts on the front piece and 2 M3x16mm screws to bolt the back plate on. The quick connect mount is reused…
I ride my electric bike (Aventon Level) down to university everyday to save money on gas. As a part of my daily commute, I use a university-provided shuttle service for the final leg of the journey. The bike is too heavy for me to lift up…
A simple to print replacement knob for the battery release latch on an Aventon Level. It may fit the Level 2 as well, I have not tested, but they look similar. Printed in ABS on a Bambu X1 with supports.
The default headlight on the Aventon Level 2 Ebike is mounted on a small bracket that fits with the stem cap. After I swapped out the original stem for a longer one, the original bracket could no longer be used. So, I created this…
If you enjoy this model, please consider making a donation to Community Pedal Power. I made this to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
This mounts underneath the Aventon Aventure Rear Rack (https://www.aventon.com/products/aventon-aventure-rear-rack?variant=39698087444675) to add a mounting point for devices that are intended to attach to a seatpost. I found that when I…
Aventon Level.2 comes with this odd-shaped seat tube that prevents easy mounting of an FD -- it arrives as a 1x stock drivetrain took some measurements, found a good way to solidly mount I first tried an E-type FD style, which would be…
Wall mount for the power brick for an Aventon Pace 500.2 (though may be compatible with many other power bricks if you check your size), with channels to use zip-ties for mounting. Holes are sized for #10 screws. This mount also ought to…
Motivation The U-lock mount that comes with the Kryptonite kit isn't very secure – it works best with round tubes, which the Aventon Level.2 doesn't really have. Therefore, I created this instead, for which you can scavenge parts from the…
This adapter allows a Topeak Quicktrack rail to be mounted to an Aventon Pace bicycle rack, since the original mounting brackets weren't wide enough for this rack. Note that I used heat-set inserts (M6*8*8) along with longer screws…
Aventon Aventure 2's rack did not have spots for the bungees of my saddle bags( Pannier ) to clip onto so I made these. I found printing these vertically with supports worked best. I made the hole m5 and sized for an allen head style…
By default it's mounted to the stem, which can make things sort of crowded up there. Aluminum Male-Female Threaded Hex Standoff required.
This is a simple wall mount I designed for holding the battery charger that comes with a Aventon Current ADV electric mountain bike. The wall mount can be use both vertically or horizontally. I used PETG, but almost any material could be…
Print 6 to replace all of the plastic bits on your seat pad and rear back rest. Use the original screws. I use releasable zip ties to make removal easier. I print mine in ASA. You can do 100% or many walls.
This is a simple kickstand I designed that mounts to the pedal and crank and acts as a temporary support for the bike. When not in use the kickstand needs to be removed and stored in a bike bag, etc. This is a temporary kickstand and may…
Abstract I wanted to use some otherwise dead space on my downtube thankfully the battery cover is easy to take off & reveals aluminum extrusion which with some reverse engineering provides a very strong joint for carrying something as…
If you enjoy this model, please consider making a donation to Community Pedal Power. I made this to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
This is a simple center stand I designed so that I could remove the shock/damper from my rear suspension. While this can support the weight of the bike, the handle bars still need to be rested up against something to keep the bike from…
This is a mount that I designed that snaps over a portion of the frame below the seat post of for use on an Aventon Current ADV mountain bike and provides attach points for diagonal rack supports from a rear cargo rack that also clamps to…
If you sell, own or work on Wolff brand e-bike, then you have probably seen this knob for the battery release break. The knob just crumbles over time for seemingly no reason. I work for a dealer and own a Vela, when i went to remove the…
If you sell, own or work on Wolff brand e-bike, then you have probably seen this knob for the battery release break. The knob just crumbles over time for seemingly no reason. I work for a dealer and own a Vela, when i went to remove the…
A Hex Wrench holder that snaps onto the seat column of the Aventon Soltera 2 (also potentially other bikes) with no part. I recommend you print this in PETG, at about 10-15% infill to make sure it's flexible enough to slide onto the bike.
I have always really liked the look and feel of the diamond shaped keychains you would see at the post office or old hotels. I made a version for my Aventon Ebike battery keys. The keychain width is 3.5 mm with a .5 width lip. I suggest…
Decided to move the stock front light for an Aventon Level 2 from the handle bar to the fork. This allows to mount a handlebar bag easier and it looks much nicer on the bike than in its stock configuration. The mount attaches to a part on…
The headlight on the Aventon Level 3 hits the cable bundle coming out of the bike stem which prevents it from being aimed at a lower angle. I printed this with PETG, 20% infill, 2 extra perimeters, and heat set a 5mm X 5 X 7 insert.
The Aventon Level 3 provides for mounting a water bottle holder on the main frame. However if you have the Step Through model at attache a water bottle holder there it restricts your ability to actually “step through” the frame of the…
This little spacer helps keep the front fender of the Aventon Level E-Bike in place and eliminates the rattle noise when going over bumps etc. I printed it out of generic TPU and it works great! It has a little handle at the top you can…
Bracket to add an additional Bike Bros rear light to Aventon bike, will work with others that have a rear bike rack assembly, with square braces.
The screw on mine apparently vibrated loose and the knob fell off during a ride. (Never found it) You can't remove the battery without this knob, so I modeled this one to replace it. You'll need an appropriate M3 screw. Freecad source…
This is a wall mount for an Aventon E-bike charger. I got a Pace 500.3 and wanted a nice place to hold the charger. I added holes to help with cooling. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No…
Hardware M5 x 12 screw M5 locknut, 5 mm height original M5 screw & locknut Motivation I mounted aerobars to my bike, so the cockpit was quite crowded & the aerobars were blocking some of the light from the front light I tried making a…
Motivation I wanted to run a bunch of accessories on my handlebars, so I needed to move the computer mount which originally spanned across the stem. Solution Uses the original hardware, which were button head screws. 2023-10-11 Lost the…
![TPU/PLA Bike Chainstay Protector [Designed for Aventon Level 2]](https://media.printables.com/media/prints/910939/images/6960035_d2154b2b-50fd-4fb9-b68c-ecaf6ecbb1b8_4f84104e-0cb4-4e69-8d21-d9fa053aa65f/image_20240612170641.jpg)
