Aventon Level 2 Headlight Relocation Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to provide mounting points for headlights after replacing the Aventon Level 2 bike stem.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 541
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
The default headlight on the Aventon Level 2 Ebike is mounted on a small bracket that fits with the stem cap. After I swapped out the original stem for a longer one, the original bracket could no longer be used. So, I created this solution.
You can reuse the original bolts, or opt for a longer M5 bolt to secure the light to the bracket. The bracket and clamps require four M3 heatset inserts and four 8mm M3 screws. For best results, I recommend using PETG, ABS, ASA, or similar materials that have some resistance to UV exposure. PLA can also be used, but it may be a bit too soft for the heatset inserts.