Aventon Level 2 Headlight Relocation Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used to provide mounting points for headlights after replacing the Aventon Level 2 bike stem.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 54
- Makes
- 1
- Views
- 541
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
The default headlight on the Aventon Level 2 Ebike is mounted on a small bracket that fits with the stem cap. After I swapped out the original stem for a longer one, the original bracket could no longer be used. So, I created this solution.
You can reuse the original bolts, or opt for a longer M5 bolt to secure the light to the bracket. The bracket and clamps require four M3 heatset inserts and four 8mm M3 screws. For best results, I recommend using PETG, ABS, ASA, or similar materials that have some resistance to UV exposure. PLA can also be used, but it may be a bit too soft for the heatset inserts.