1 / 5
Bambu Labs Magnetic Poop Chute with hidden magnet — zdjęcie 1
1 / 5

Bambu Labs Magnetic Poop Chute with hidden magnet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small Magnetic Poop Chute with hidden magnet for Bambu Lab X1/X1C/P1S/P1P

Ocena
0 / 5
Polubienia
3
Pobrania
58
Wydruki
0
Wyświetlenia
632
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a small Poop chute for the Bambu Lab Printers (X1, X1C,P1S,P1P)

I Recommend printing at .16mm layer height, deafult speed (you can easily print this in the sport or even the ludicrous mode), 100% infill 

This model uses less than 23 grams of fillament

You will need a rare earth magnet (12mm diameter, 5mm thickness)

YOU HAVE TO ADD A PAUSE AT LAYER 92 (or before the top surfaces of the magnet enclosure starts printing) put the magnet in the holder and add some super glueand wait 5 minutes for it to dry, then resume the print

It's supposed to be inserted into the poop chute exit and it should stay in place with the help of the magnet.

Tagi