Bambu Labs Magnetic Poop Chute with hidden magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small Magnetic Poop Chute with hidden magnet for Bambu Lab X1/X1C/P1S/P1P
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 58
- Makes
- 0
- Views
- 632
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small Poop chute for the Bambu Lab Printers (X1, X1C,P1S,P1P)
I Recommend printing at .16mm layer height, deafult speed (you can easily print this in the sport or even the ludicrous mode), 100% infill
This model uses less than 23 grams of fillament
You will need a rare earth magnet (12mm diameter, 5mm thickness)
YOU HAVE TO ADD A PAUSE AT LAYER 92 (or before the top surfaces of the magnet enclosure starts printing) put the magnet in the holder and add some super glueand wait 5 minutes for it to dry, then resume the print
It's supposed to be inserted into the poop chute exit and it should stay in place with the help of the magnet.