1 / 3
Screw Mounted Scissor Holder For Ikea Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw mounted holder for the basic scissor to be put on the Ikea Skadis board.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This model holds a scissor in place on the Ikea Skadis board.
The mounting method used is with two M3 screws and nuts for easy installation.
The M3 nuts are originally too small for the board holes so you'll have to print the included spacer model two times.
Instructions:
1. Print the holder model 1 time.
2. Print the spacer model 2 times.
3. Assemble the holder model onto the Skadis board and use the spacers behind the board.