49mm filter adapter for OM System TG-7 / Olympus Tough cameras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A relatively low profile 49mm filter thread adapter. Use the same filters as you would on a GRIII
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 169
- Wydruki
- 3
- Wyświetlenia
- 1235
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a relatively low profile 49mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as you might use on a Ricoh GRIII, which can also use the same batteries… Convenient
I suggest printing the ring parts with the front part down (as it's oriented in the stl) with 0.15mm layer height. They should be fine without supports.
*⚠ Important note: this has only been tested on the TG-7. It should work on other TG series cameras, but I haven't been able to test. Post a make or leave a comment if you're able to try it!
I used this blender plugin to help get the filter thread right:
https://makertales.gumroad.com/l/PrecisionBolts