BMW F 800 GS pillion foot peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D scan of a BMW F 800 GS pillion foot peg "spring action" element.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought a used BMW F 800 GS, and the pillion foot peg was clamped to the chassis with a zip tie. After inspection - a plastic element which holds the foot peg up or down was missing. So I took apart the other one which was still there, 3D scanned it with Revo Inspire, and printed out of PC Blend.
IMPORTANT: Check which one you need, and if you need the other one: mirror via Y or X axis to hearts content.
I didn't model this, it's purely a 3D scan of a genuine BMW part - intended for DIY use only.
Print settings: I've cut a little from the bottom of the part, to make it lay flat on the bed, and I used 100% infil. To be frank, I believe PC Blend is an overkill, since this part is only compressed. Use something weather and heat resistant, and it shall work fine. No supports.