1 / 6
BMW F 800 GS pillion foot peg — image 1
1 / 6

BMW F 800 GS pillion foot peg

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D scan of a BMW F 800 GS pillion foot peg "spring action" element.

Rating
0 / 5
Likes
3
Downloads
58
Makes
0
Views
760
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

I bought a used BMW F 800 GS, and the pillion foot peg was clamped to the chassis with a zip tie. After inspection - a plastic element which holds the foot peg up or down was missing. So I took apart the other one which was still there, 3D scanned it with Revo Inspire, and printed out of PC Blend.

IMPORTANT: Check which one you need, and if you need the other one: mirror via Y or X axis to hearts content.

I didn't model this, it's purely a 3D scan of a genuine BMW part - intended for DIY use only.

Print settings: I've cut a little from the bottom of the part, to make it lay flat on the bed, and I used 100% infil. To be frank, I believe PC Blend is an overkill, since this part is only compressed. Use something weather and heat resistant, and it shall work fine. No supports.

Tags