Counting matching models…
This is the adapter I designed to attach the Smart Orbiter 3 (Revo Edition) to my Hypercube Evolution. It should fit the standard Hypercube Evolution carriage with 3mm dowel pins. It should work as well for the original Smart Orbiter 3…
Print with PLA or PETG, only 1mm of clearance so warping could prevent fitment. Update: Redesigned for 5x3mm neodymium magnets, just glue them in place (they have to sit flush with the contacting are). 5x1mm magnets weren't strong enough……
In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…
The 3D-printed pill dispenser in the shape of a revolver is an innovative and practical solution for daily medication management. With its unique revolver-inspired design, this dispenser provides an easy, secure, and organized way to…
Designed to interface the camera mount that comes with the CADDX Ratel 2 with the base plate of the Fossils Stuff Revo 5 frame. You will need: 2x M2 x 4mm heat-set insert 1x M3 x 4mm heat-set insert 2x M2 screw 1x M3 screw
Wanted to spice up my plague doctor costume with something that I wouldn’t get arrested for, this revolver clearly would not function in our mundane world. Requires: Epoxy resin Paints Scrap part 50 x 30 x 3mm plexiglass or similar…
A hand controller for Dance Dance Revolution and related games! Included files are for the case and the divider. It uses 50mm arcade buttons for the directions and 30mm buttons for everything else. PARTS REQUIRED: 8x 50mm buttons. I used…
Just a stand with a base, glued together with superglue. No special material or settings required.
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
Important! Measure the pin on the heatbed is 4mm or less; if the pin is too high, the duct will clash with it and may cause damage! (You may try to grinding the pin down a bit or cut this model from the duct side by 1mm or so to make it a…
Introduction / Einführung Quick info: I ordered the INDX Toolchanger with 8 Nozzles on Prusa Launch-day. As soon as it gets delivered I will started with the development for the free upgrade to host the 8 spools, of course still on top.…
I have a set of Revolt modular tools and needed a way to mount it on the wall, so I came up with this design. It’s made to fit an M3 screw.
The top text on the original label needs three colours to look good (one for the background, one for the bottom text and the drop shadow on the top text and one for the letters of the top text). I only had black and white PLA tho, so I…
BAK Revolver 4s Driver Side End Cover. This is still a work in progress. I printed this one to make do in the meantime. Anyone who has this tonneau is probably missing theirs as well. I made the insert so you can glue it in place, and it…
It holds 2 extra nozzles over using two 1x2 holders. That's pretty much it.
Note: the press-fit is sensitive to pressure advance and printer dimensional accuracy. (You can also use the negative shape slicer tool to add labels)
Add a couple of Revo Voron Nozzle Holders For Micron R1 to keep your nozzles handy. You can use the same twist pins as the R1 panel clips for this mount. Use the same settings that you used for the panel clips during the build. I printed…
This M-Lite Revo dust plug is precision-printed in TPU to provide a flexible, durable seal that protects the M-Lite Revo by Filmatura battery/ SD Card compartment safe from dust, debris, and residue when not in use. Designed for a snug…
This is a insert for "E3D REVO Nozzle Storage Skadis v2". It adds color for better organisation. Just glue it in with some superglue. Use a nozzle to center it and press it down with. It was designed with a 0.25mm nozzle and a layerheight…
I created a holster for my sister's halloween costume. The revolver is made by the designer DeSteiner You can print it on a 256x256mm build plate, fold it and stitch it together with thread. Any mostly standard 40mm belts will fit.
Had a spare BIQU Panda Revo and decided to put it to good use. This mod is only tested with it, but should also work with most of Bambu P1/X1 style hotends. The heater uses 10-12 more watts, but it worked for us. Usual warnings: we are…
A lower Spoiler Remixed of the double one by Eric Stolt. Printed in ABS-CF, stiff but not to much. For best durability use Hard-TPU
This is the fan duct for my Smart Obriter V3 revo mount on the Raise3D Pro 2: Fan is a 6023 blower (approx. 10 CFM airflow with this mount). Significantly outperforming 5015 fans found on most 3D printers (approx. 3 CFM). Note: Works only…
Upgrade your Raise3D Pro 2 to the Smart Orbiter V3 in the E3D Revo edition. This is part of a larger upgrade. Reusing the original Raise3D toolboard might be possible as the plastic parts of the Raise extruder are reused as drag chain…
Remixed the great design by PrintedForFun to orient the storage bins so they fit when the turntable is right side up. Also changed the magnet size to 6x3 and the design to be press-fit vs. glued. The step file is included if you need to…
The author uploaded the wrong STL file for the "MAGNET_REVOLVER_SIDE-PART (D7,D8 - 2x)" file so I made my own version.
Remixed the Spiked Wheels to fit the little Revo. It has brutal Grip, but should only be used on ice and hard snow. Otherwise, they will be gone in no time. Printed with PETG-CF with 5 walls and 40% Gyroid infill
You may screw this nozzle holder onto the frame extrusion of your Voron printer. To do so, you need M3 roll-in nuts and M3x8 screws that you are familiar with from your Voron build. The holder comes in variants from 2 to 6 nozzles…
It is the arch de triumph and it has revolving cars! To assemble I have pictures on how to do it above You need to use supports for all of them but the cover (the green thing)
Mounting brackets for UGreen RevoDock Pro. I could not find any for this model so I made some. I used PLA which may work fine but the dock does get warm so I would advise using PETG or maybe even PA if you want to go overkill. Nothing…
Popis: Univerzální nástěnný držák pro 2K (dvousložkové) lepicí pistole. Na rozdíl od většiny držáků tento design podpírá pistoli za tělo, nikoli za kartuši, což zajišťuje kompatibilitu s různými poměry kartuší (testováno s 1:1 a 1:10). 2k…
Recommended settings 0.2mm layer height, structural setting 3 perimeters In order to maintain proper alignment - don't over tighten the threads; they are designed to stop at the right point but you can force it into misalignment if you try.
A re-upload of the Wasp Revolver carried by Col. Miles Quaritch in Avatar (and later Avatar: The Way of Water and Avatar: Fire and Ash, I believe). It is a non-functional prop. I modeled this many, MANY years ago under a different handle.…
BANG! Compact Travel Organizer & Thematic Upgrade Set This project is a compact and secure travel storage solution for the board game BANG! . Designed to be smaller and more portable than the original box, it securely stores the base game…
A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Shadow Revolver Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print and perfect for a…
I wanted a slightly larger turntable plate for the Dual-Axis scanner included in my RevoPoint MetroY Pro kit ( https://amzn.to/4qK292l ). The turntable is the one in this listing -> https://amzn.to/4tOGvfM - out of the box, it features a…
ich hatte bisher das Board von "NATA" genutzt , aber mit der Zeit wurde der Platzbedarf zu hoch und so habe ich diesen Revolverturm erstellt, Reicht für 100 Dremel Werkzeuge, auf 90x 210 mm Fläsche
Thule ProRide Adapter auf Giant Revolt Advanced 0 Um den CFK Rahmen zu schützen beim Thule Proride Halter gibt es von Thule den CFK Frame Protector leider ist beim Giant Revolt Advanced die Rahmen Tasche sehr niedrig angebracht. Um die…
A simple remix to help keep the fans in place ("fan-saver") for the Revo Micro mount for the Mini Stealthburner toolhead. Print with recommended Voron settings.
E3D Revo Nozzle Holder for Ender 3 V2 Top rail
designed for 3D Scanning Marker by @firstgizmo A variant of the "ThreadToThread" part designed to be screwed directly into the threaded holes of the Revopoint Dual-Axis Turntable (which correspond to the M6 standard). Several heights are…
The first of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…
The second of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…
The third of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…
I needed some extra spacers for a Bessey Revo Krev, so I designed one. Tried and tested by my carpenter father
The old inserts get brittle and fall apart. I modeled this file using original sizes. And it works as a charm. It may require sligh scaling depending on the material used. It may work with other Revox knobs - such as B780, but not…
Donnez un look "Far West" à votre bureau avec ce support de rangement pour piles AA en forme de barillet de revolver. Conçu pour accueillir 6 piles AA, ce modèle n'est pas seulement esthétique, il est aussi fonctionnel : le barillet est…
Printer K1C Print Setings Layer Height 0.2 Infill 15% Support tree(auto) Any size
Dieser Kelch für den Original Revox NAB-Adapter passt gut unter die Staubhaube des Revox B77.
Never change a winning and happy team. As I'm pleased with my revo voron setup on the EVA3 setup on my Rat Rig v-core 3.1, my intention was to re-use it in my upgrade to Rat Rig V-Core 3.2H with the new Toolhead setup of the V-Core 4. So…
I designed this custom drop-in holster to mount a Bose SoundLink Revolve speaker directly to my Super73 RX. If you want to listen to music while riding and need a mount that can handle high speeds, heavy bumps, and vibrations, this is it.…
This is an insert of CCI 100 round boxes that stores 40 rounds in a way that works with speed loaders. There is no space in the box for the actual loader, this holds ammo only. I print them upside down but it shouldn't really matter, no…
This 1/16 EREVO aero package is developed for high-speed stability. Custom front skid/splitter/vertical stabilizers and rear diffuser to manage airflow and minimize lift in the front. Paired with a low center gravity stance, using limited…
This model is a functional, themed organizer designed specifically to hold 1oz circular tins , such as those found in the Viking Revolution Beard Balm variety packs. The design features a curved, nautical-inspired hull that allows for…
The same extruder with linear X-rail: https://www.printables.com/model/1122381-mk3-bear-mit-linear-monorail-x-und-y-achse This is my extruder for Prusa MK3 featuring E3D's Revo Micro and the new Orbiter V2.0. I'm using this design since…
I hate heat inserts ;-) This is a remix of https://www.printables.com/model/360900-revosix-hotend-mount to be assembled with hex nuts instead of heat inserts. Please give your kudos to…
This is a 1x1-grid, quarter height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridinity and i have tons of drawers and tool organizer that i use…
This All-in-One 360° revolving desk organizer will help you to stay organized with style! A sturdy and stylish organizer that has been designed for 3D printing and can be rotated for easy access to your daily stationary - or even be used…
Ochranný kryt pred spadnutím reťaze pre 1-prevodník SunRace 34T 96BCD, vhodný pre prevody 1 x 8, 9, 10. Oba diely sa zoskrutkujú 4 skrutkami M3 x12 mm. Pri nasadení zadného dielu je potrebné stiahnúť kľuku. Tlač PLA Spectrum Deep Black,…
Mount for UGREEN Revodok with riser to connect the usb ports at front. Mounting is supposed to be 4mm sink head screws. Print with front facing down.
Remix of stock Micro Swiss cooler for the NR Revo to fit 4020 blower
The .gcode is already cut in half and placed in the most optimal print position. The .stl and .step are left whole in case you want to use them elsewhere. Happy Printing!
a little and fast to print wrench to remove a revo (print time ~10 minutes)
This is a remix of the original MicoSwiss bracket, but i have extended the bracket so that it hits the endstop before the cariage runs of the rails. Printed in ABS, but should be file to print in PLA 0.2mm Layers
This is to use the LGX PRO and the Creality Revo Six. I have it installed and testing. The LGX PRO is heavier and larger then the stock extruder. I went with the pro for a couple reason 1. it can handle higher temps as I have mine fully…
Get the right length for the Voron Galileo 2 and Revo hotend. I measured it a few times and came to 48.50mm Update: 48.50mm was too short, i remeasured and came to 49.60 Also uploaded a 49.70 version for a bit more tight fit
updated tool head for the hoon linear rail mod. upgrade the extruder to the lgxpro and revo. I use this for the ERCF and get perfect swaps. cooling is way better and best of all the rattle from the hoon tool head is gone.. Print should be…
Introducing the AA Battery Revolver Drum Organizer : a sleek and innovative solution for your battery storage needs. Inspired by the classic revolver drum design, this organizer is ingeniously crafted to hold up to 8 AA batteries. Its…
This is the recommended extruder for the Prusa XS, XXS, M, and derivatives. Build guide coming soon. March 10, 2024 UPDATE: A new wrap around fan duct has been uploaded, this fan duct increases the surface area of the exit so less airflow…
Ich arbeite vorwiegend mit den E3D Revo 0.40'er und 0.25'er Düsen. Beim Reinigen der Düsen wechsle ich meist die Silikonsocke. Leider sind die Socken nicht einzeln sondern nur im Set (0.25, 0.40, 0.60, 0.80) erhältlich. Aus diesem Grund…
Total weight of tool: 215g (measured by un-docking tool and placing it on a scale). No PCF mounting as I use side panel mounted fans. This setup is capable of printing 90A TPU without issues (I have not tried anything softer than this)…
Introducing the Revolving Rolo Rocket! This can be a calibration model, there are some overhangs and cooling needs to be pretty good. The door should revolve by spinning the top if your printer is tuned well, Great for storing your…
I've re-made the revolver based on original EDUNBR3D's design implementing some changes for easier printing. I sliced in OrcaSlicer from STEP files using tree/organic supports. You can see my support parameters on included pictures.…
Create your own full coverage silicone sock for E3D Revo to reduce filament buildup on the nozzle. Recommend 0.1mm layer height. A high temperature silicone, such as RTV high temperature sealant or Smooth-On Mold Max 60, is highly…
This is a quick .3mf (OrcaSlicer 2.2.0) of an adapter I made for mounting a Revo hotend to the SV08 at the same length as the original hotend. Working on a finalized .STL Printed in ASA with supports. Length should be close depending on…
This stylized logo for Prince and the Revolution was used on the 1985 album “Around the World in a Day” and compliments the similarly styled Paisley Park logo.
BETA The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. These…
Nerf revolver firing short darts from a 6 dart cylinder that swings out and is removable. Prime the blaster by pulling the hammer down with your thumb. Two way trigger, pull trigger to fire, push trigger forward to unlock the arm and…
Bladed Revolver for Dummy 13 both Right and Left Hands
Bladed Revolver for Dummy 13 both Right and Left Hands
A simple brushless motor mount designed to convert a stock nitro Revo 3.3 into electric. Printed in Prusament PETG, 100% infill, supports are recommended for the motor mount holes. In the future, I may reposition the mounting holes…
Update: v2 taller cable channel and moved over for ease of use. Added option for threaded inserts ( M3x5x4)
Two versions, one uses 2 screws to mount like the original. The second version uses 3 screws to mount to the motor. The CRTouch fits in the original location with this fan duct mounted. From the original designer: "My take on the 5015 fan…
holster for the hdr 50 umarex revolver
Bladed Revolver for Dummy 13 both Right and Left Hands
This is the adapter I designed to attach the Smart Orbiter 3 (Revo Edition) to my Hypercube Evolution. It should fit the standard Hypercube Evolution carriage with 3mm dowel pins. It should work as well for the original Smart Orbiter 3…
CZ Ahoj všichni, nabízím vám ke stažení model pickupu, který jsem naskenoval v rámci mého videa, kde popisuji a radím, jak skenuji s 3D Skenerem Revopint Mini. Video můžete shlédnout zde: Ať vám to tiskne! ENG Hello everyone, I am…
I used 3M VHB tape to attach the camera to the inside mount and to attach the adapter PCB to the face of the hotend (I dont think there is a good spot to attach it to). the one pictured above isnt quite the same, the one in the file has a…
Snap on bumper extension to prevent Roborock Q Revo vacuum from climbing chair legs etc. Bumper of the Q Revo is very asymmetrical unfortunately. To fit majority of the spots you may want to mount the extensions there are two files. For…
This is a conversion cylinder for the First Strike paintball revolver that allows it to use short darts. Only mod needed is to cut down the barrel, and add the metal piece to the cylinder. This thing shoots HARD.
3D scan of a Mammoth with the revopoint POP3Plus. There is a file with the original scan and a cut to have a flat foot to facilitate FDM printing.
This is a Shell for the Dan Wesson Revolver designed for 6mm BBs. The Feature that makes it special is the "Shotgun-like" capability of shooting up to 5 BBs at once. You may have to scale it to fit you printer accuracy. Feedback is…
![[ALCH] E3D Revo nozzle box (ModuBox)](https://media.printables.com/media/prints/467299/images/3830613_969f20b3-135a-4993-9b75-3960a88c1f10/alch-revo-nozzles-1.jpeg)
