1 / 5
Revopoint Dual-Axis Turntable Holder for Nano Vise 2.0 and Nano Chuck / Revopoint DATT Halter für Nano Vise 2.0 und Nano Chuck — image 1
1 / 5

Revopoint Dual-Axis Turntable Holder for Nano Vise 2.0 and Nano Chuck / Revopoint DATT Halter für Nano Vise 2.0 und Nano Chuck

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.23 – €0.28 net (excluding VAT)

For file: M8x8 Socket Head Screw_0.15mm_PETG_MK3S_21m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.25 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
21.6 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Adapter to fit a Nano Vise 2.0 / Nano Chuck on a motorized Revopoint Dual-Axis Turntable.

Rating
5 / 5
Likes
64
Downloads
244
Makes
2
Views
2,942
Reviews
2

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck”) on the Revopoint Dual-Axis Turntable. The holder can be attached to the turntable with two screws developed by Whitehawk2000 for his scan plates. To connect the holder and the “Nano Vise 2.0” or “Nano Chuck” you need an M8x8 cylinder head screw. I have designed and uploaded one if you don't have it.

Print the adapter in STL orientation with 0.2 layer height, 15% infill and without support. Print the screw in 0.15 layer height, 100% infill and with no support if you print in STL orientation.

— I would be very happy if you have as much fun with the things as I do. — 

 If you like :-) Thank you very much!

— German desription — 

Hier ein Adapter zur Befestigung des sehr beliebten Miniatur-Schraubstocks “Nano Vise 2.0” sowie des “Nano Chuck” von  PRima (remix von mdkendalls “63mm Dreibackenfutter”) auf dem Revopoint Dual-Axis Turntable. Der Halter lässt sich mit zwei von Whitehawk2000 für seine Scanplatten entwickelten Schrauben auf dem Drehteller befestigen. Für die Verbindung des Halters und des “Nano Vise 2.0” oder “Nano Chuck” braucht ihr eine M8x8 Zylinderkopfschraube. Ich habe so eine Schraube konstruiert und hochgeladen, falls ihr keine habt.

Druckt den Adapter in STL-Ausrichtung mit 0.2 Schichthöhe, 15% Infill und ohne Suppoert. Druckt die Schraube in 0.15 Schichthöhe, 100% Infill und ohne Support wenn ihr sie in STL-Ausrichtung druckt.

Tags