1 / 7
NIU-N1 Battery connector adapter to XT60E-F — zdjęcie 1
1 / 7

NIU-N1 Battery connector adapter to XT60E-F

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

i need to modd the battery connector of a NUI-N1 scooter battery to use a more available type of connector

Ocena
0 / 5
Polubienia
5
Pobrania
36
Wydruki
0
Wyświetlenia
543
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

i need to modd the battery connector of couple of NUI-N1 scooter batteries to use a more available type of connector, since the original connector was hard to find and expensive, so i came with this model that replace the original socket on the battery with out any modification to the battery , and allows the use of the more available XT60 connector leaving the battery is the original conditions with out hanging cables or anything a like since already internally the battery use a XT60 connector on the output cables ,the current parameters are the same should be no issues with using a XT60 for the battery output terminal  , you will have to take a part the battery and replace the hole 5 pin original connector with this setup. also i include the blank piece in case that you need it to use other type o connector. this model is to use an XT60E-F panel mounted connector but the blank model should be able to adapt any other type of xt connector to it

Tagi