NIU-N1 Battery connector adapter to XT60E-F
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
i need to modd the battery connector of a NUI-N1 scooter battery to use a more available type of connector
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 543
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
i need to modd the battery connector of couple of NUI-N1 scooter batteries to use a more available type of connector, since the original connector was hard to find and expensive, so i came with this model that replace the original socket on the battery with out any modification to the battery , and allows the use of the more available XT60 connector leaving the battery is the original conditions with out hanging cables or anything a like since already internally the battery use a XT60 connector on the output cables ,the current parameters are the same should be no issues with using a XT60 for the battery output terminal , you will have to take a part the battery and replace the hole 5 pin original connector with this setup. also i include the blank piece in case that you need it to use other type o connector. this model is to use an XT60E-F panel mounted connector but the blank model should be able to adapt any other type of xt connector to it
