Counting matching models…
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
If you like my work please support me. :-) Buy me coffee at ko-fi.
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
In the days before blue tooth speakers were a thing, people made all sorts of acoustic gadgets to make their phone seem louder than it really was. Unfortunately that did nothing to improve the quality of the sound. With the advent of…
No mag-safe needed! 100% printed is so much cheaper. Support paint-on already in 3mf. Check ‘enforce supports only’ Try using your iPhone as a webcam. It works amazing! Also great for recording your face while recording your screen. This…
The new continuity mode for iOS and MacOS allows anyone to turn their iPhone into a webcam. The problem is not everyone has an Apple Studio Display or another specific display. The same goes for iPhone models and phones with cases. The…
This holder will fit an iPhone 14 Pro and a MacBook Pro (14", 2021). It will attach the iPhone to the display/lid of the MacBook to use the iPhone's camera instead of the built-in camera by using the feature “Continuity Camera” introduced…
An iPhone continuity camera mount designed to fit the iPhone 12 to 14 while in its protective case. This mount can be easily hung on a MacBook 13", 14", or 16", however, it fits best on Apple Silicone MacBook 14 or 16 inch. The mount has…
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
This is made by a ART student in the early 20th Re sculpt by AI prints in fdm 0,2 no support use 0,12 for more detailed SLA use the 0,05 as the MODELL in preview is done MORE CREATIONS SEE MY ACCOUNT…
Originally saw Nomad's Galaxy variation, but was not happy that it does not look like original Core One spool holder. Additional hardware: For Core One + O-ring from the original holder (25x3.5 mm) - you can even print a new one,. For…
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
A mount to use your iOS 16 (Beta) MagSafe equipped iPhone as a Continuity Camera to replace your Apple Studio Display See https://www.theverge.com/2022/6/7/23158510 for more information. *Important* : This is designed to be used with an…
Have you ever wanted to attach your iPhone 6/6S/7/8/SE2020/SE2022 to a laptop or Macbook? Then this is the right 3D model for you. For Continuity Camera, Camo app and other webcam phone utilities. No MagSafe needed and compatible with…
I had tried the continuity cam holder from llang https://www.printables.com/model/277366-continuity-camera-holder but noticed that its too tight for my iPhone including the Apple silicon case I'm using. So I redesigned the model in…
Continuity Camera is a great new feature for the iPhone, allowing you to use your phone as a webcam with super picture quality. Here's a universal phone mount to use your iPhone and Continuity Camera with any external monitor. The monitor…
Check out everything else I've 3D printed here https://www.samhillier.co/3d-print/ Lots of stuff I've not uploaded on here yet.
Ingenuity , nicknamed Ginny , is an autonomous NASA helicopter that operated on Mars from 2021 to 2024 as part of the Mars 2020 mission. Ingenuity made its first flight on 19 April 2021, demonstrating that flight is possible in the…
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to fork .shapr source file:…
Holder to attach iPhone to LG monitor (27UN880), the iPhone works as Continuity Camera during video calls.
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…
A simple monitor clip/stand to hold you iPhone when using Continuity Camera. This fits my LG 27MD5KL (5K LG) perfectly, and even allows you to still use the monitors builtin camera
This is my brain! I made it, and then I made this sculpt and printed it. Supports are needed, and I highly recommend putting a void inside, to reduce the weight, printing time, and filament cost. You generally have the right to ask for a…
This is supposed to be used to hold your iphone above your macbook pro in order to use its camera as webcam. If you use a non apple magsafe charger with a slightly different diameter you can adapt the size in openscad.
iPhone mount to use Apple's continuity camera feature on a Dell monitor. This was designed for the classic 24 inch Dell monitor every workplace seems to have, with the horizonal line across the back. Mount is designed to hang over the…
This holder was designed to attach iPhone to LG monitor (34WN80C-B UltraWide Curved), to use the iPhone as Continuity Camera during video calls. Even though it was designed specifically for my LG monitor, users in the comments confirmed…
Easily use our iPhone with MacOS Ventura as a webcam. This holder hangs on the screen and holds your iPhone. It was designed to be printed with a .6 mm nozzle and a .3 mm layer height. It fits my iPhone 13 with an original Apple Silicone…
After designing and posting a magnetic continuity camera mount. I realized a lot of people might not have or want to purchase a magnet array, so I created this basket-style continuity camera mount.
iPhone Continuity Camera Mount for Samsung Q70 TV. Used in conjunction with an Apple TV with the new FaceTime feature in 2023 release of tvOS 17 so that you can mount your iPhone above your TV. I designed it with a Samsung Q70 TV and…
Inspired by the "Ultimate Extruder" I created this modification which includes all original parts. The position of the nozzle as well as the leveling sensor remain exactly the same, even identical in Z to the tenth. So you don't have to…
iPhone Continuity Camera Mount for MacBook Pro. (No MagSafe Required) Print Recommendations: Print the mount on its side vertically so that the printer doesn't need to travel across open space and produce saggy lines. Post Print…
Halter für das Kamera-Übergabe Feature in macOS Ventura. Mit diesem Halter kann ein von der Kamera-Übergabe Funktion unterstütztes iPhone an einen iMac oder iMac Pro befestigt werden. Bisher konnte ich nur Halterungen für die M1 Mac-Reihe…
I remix this great model to suit my HP EliteDisplay E243 monitor. I also increased the length a little bit.
Made to fit an iPhone 14 Pro or smaller. Most curved monitors should work, this was designed for a curve of 1500R but it has some wiggle room built in. Print with the flat side down, supports are optional - if your printer can't handle…
This is a remix of the existing model that fits for the thicker MacBook Pro (2023 model) and the iPhone 14 Pro with leather case. Hook is 5mm wide and slot for iPhone is 11mm wide. On the last image is the comparison with another model…
Use MagSafe compatible iPhone as webcam on MacBook Pro and air. Used magnets from aliexpress .
A mount to use your iOS 16 (Beta) MagSafe equipped iPhone as a Continuity Camera to replace your Apple XDR Display. Note this model has not been tested but is based on submitted measurements:…
This is a mount to attach your iPhone to the top of an LG Ultrafine 5K 27" display for use with Continuity Camera
This is a quick Remix of the Continuity Camera Holder for my old Thunderbolt Display. I couldn't find a holder which fits onto the old Thunderbolt Display so i made my own.
This is my version of a Continuity Camera. It has a wider slot for the phone to sit, ensuring it won’t fall out. Also the slot for the phone will fit all phones and most phones with cases. If there is a huge gap, I designed 1mm, 2mm, 3mm,…
With Mac OS Ventura and iOS 16 now released, one can now use your iPhone as a far superior web cam for your MacBook. I challenged myself to design and print an iPhone adapter instead of ordering the Belkin adapter. Did some research,…
I had problem with original 3D printed servo arm slipping from the servo, that's why I made this adapter for the aluminium servo arm. You will need aluminium servo arm 25T, see attached image. Supports are already built in, don't forget…
Inspired by https://www.printables.com/model/223040-magsafe-iphone-holder-for-continuity-camera-in-mac, but since I only have an iPhone 11, I can't use a magsafe-holder, therefore I decided to create this little gadget, which allows any…
a quick print to mount your iPhone to your Macbook to use it as a webcam https://support.apple.com/en-us/HT213244 Print with side orientation with supports.
Update: now available as a .f3d file with almost everything set via user parameters. Adjust as necessary to your specific monitor! This model requires an Apple MagSafe charger to hold the iPhone (and keeps your phone charged while you're…
Continuity cam mount for iphone 12 with cover, designed for Dell P2418D. The part that clings to the top of the screen measures 15mm. Printed mine with 3 perimeters and 20% infill at 0.2mm layer height
Continuity Camera: Use iPhone as a webcam for Mac iPhone holder of various sizes/by model. [Apple Manual]
This mount allows you to dock your iPhone to your Mac or an external monitor and use your smartphone as a webcam on your Mac with Apple's Continuity Camera. The iPhone requires iOS 16 or higher and the Mac requires macOS Ventura or…
This is a three-part MagSafe mount for any display that is up to 22mm thick. You can either use the rear camera (for example as Continuity Camera) or flip the holder over and use the front camera the additional screen. Materials 1 M3*40…
A continuity camera mount for using your iPhone as your webcam on a MacBook Pro. Requires a MagSafe charger that wedge fits into the mount. Triangle adapter is for adjusting angle of phone if so desired. Category: Mobile Phone
Print instructions 15% infill 0.20mm layer height Use supports and print position as shown below Use default print speed PLA How to setup the rest Remove supports Hang on upper edge of display and place your iPhone in Setup continuity…
This is my version of a Continuity Camera. This one will only work with iPhones that have MagSafe (you will also need a MagSafe charger. If you don’t have one, check out my other Non-MagSafe Continuity Camera). Note: There should be a…
Continuity Camera Holder. Parametric design allows all distances to be adjusted
With iOS 16 and MacOS 13 you can use your iPhone as a native camera for all your applications. Simple little items that can be used to attached your iPhone to your MacBookAir at just the right height to have your camera peeking out from…
Desigend/remixed for the iPhone 13 Pro with a silcon case of 11.5mm thickness.
I really loved the Tonuino by Mr. Voß: https://www.voss.earth/tonuino/ (German) It is a mp3 player where the tracks are triggered by a nfc card. The audio files are stored on a micro sd card. Here is my enclosure for all the components.…
MacOS Ventura and iOS 16 introduce Facetime being able to use the iPhone's camera as a webcam. For this, the iPhone needs to be attached to something. I chose the screen, this is for an LG 38" display. The holder fits over the front and…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
bouchon imprimé en PLA marron bois , couche 0.1
A magnetic mount to adapt Peak Design's Mobile Case to an 16" MacBook Pro (2021) for use with Reincubate Camo or macOS Ventura's forthcoming Continuity Camera feature. Requires 4x 10mm x 3mm refrigerator magnets and a suitable pause at…
This is a build of the TonUINO Project with the All-in-One PCB from Leiterkarten-Piraten. It's a Musicbox (not only) for Kids with a RFID reader. By holding a card on the top of the box, specific music will play. More information on the…
I adjusted the holder to fit my iPhone 14 Pro with my M1 Macbook Pro 14".
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
A magnetic mount to adapt Peak Design's Mobile Case to an Apple Studio Display for use with Reincubate Camo or macOS Ventura's forthcoming Continuity Camera feature. Requires 4x 10mm x 3mm refrigerator magnets and a suitable pause at the…
Description : This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much voltage falls on the LED at 10mA current?" or "is this an IR LED or what?" by…
I've made this model to mount an iPhone 11 pro to the top of an LG 24UD58-B. The iPhone only fits without a case and sticks out high enough to use the ultrawide camera.
This is a remix of sumit_basra's awesome Continuity Camera holder with an Arca Swiss style mount. I wanted to mount my iPhone to a tripod I already have on my desk, so I did this quick remix. Please follow description in the original…
I tightened it a bit and adjusted it for using with a case and an angle, it is now a very snug fit Also simplified it and reduced the filament needed quite a bit. Enjoy all the cameras and microphone :)
Pro monitor : https://www.electroworld.cz/hp-m27fw-2h1a4aa-abb-stribrny Vytiskl jsem to ve výšce vrstvy 0,25 mm s 15% výplní. Při tisku na výšku by neměla být potřeba žádná podpora. Měl by fungovat i bez raftu, pokud máte dobrou…
I needed a MagSafe mount for my LG 4K 27in and found the Customizable MagSafe Continuity Camera Mount design by jadam . The monitor clip didn't quite fit, so I threw together a quick remix. All parts have been parametrically redesigned in…
do NOT take off the thin bit on the chickens left it is part of the model. Also these animal company stuff are pretty much all from sketchfab. The creater of these models is Romeo rios.
Changed the original veriosn of RoulDIY a bit, so thicker phones, like a iPhone 13 Pro Max with SP-Connect case fits.
iPhone holder for the Quad Lock-system meant for use on MacBook Pro M1 Pro 16". Possibly fits other models. Made to use with the Continuity Camera feature of MacOS.
I have an Apple Studio display, but like many, have been disappointed with the built-in webcam's quality. Now with Continuity Camera , you can use your iPhone's really great camera instead. I designed and printed this mount specifically…
Rainbow Genuine D4 and D3 Main Housing Water Pan Latch Holes marked for assembly parts. recommend PETG
Prints without support it is not very detailed so use 0,2layer Have fun If you remix Mark as REMIXED
Modified version of a preexisting mount to work with the Samsung QN90B 65" TV.
This is an iPhone mount for an M1 iMac to use your iPhone as a camera using the new Continuity Camera feature in macOS Venture 13.0 and later.
This design is made to hold an iPhone in both vertical and horizontal positions as a continuity webcam and can be easily folded flat for storage. It is designed to be printed in PET-G, but it may be possible to use other materials such as…
A remixed iPhone Continuity Camera holder for Samsung F32TU87.
Will Update soon with the complete part list and assembly instructions. For now, here's the main files as well as a youtube clip with a showcase for my design. edit: for some reason I can't upload some of the bigger files... will try…
A simple monitor mount for using a iPhone in continuity camera mode. The mount utilises a ball head, so you can use a compatible magsafe magnet for better adjustability. (such as esr halolock). 16.11 - Added a V2 with the ball head higher…
Taking the available files from Calamity's Digital Constraction Collection I was able to mod the mask from Toa Mata Nui's build into a Printable form for use on builds Still have work to do in order to look 1:1. Print Settings Printer…
Simple Customisable Continuity Camera Mount for External Monitor Allows most of the iPhone to rest behind the monitor so that the camera is closer to eye level. The downward-facing angle can be adjusted in the OpenSCAD file.
Mounts your iPhone to the top of your monitor to be used with Continuity Camera as a Webcam.
I was having issues with my anycubic mega pro SD card disconnecting midprint, or not showing files. Forums helped me get files to show sometimes once I shortened the file names but still needed to wiggle the card. Electronics contact…
This stand is suitable for the macbook pro 2022, and surely also for other previous Macs. Iphones with thickness (with or without shell) 8,5 to 11mm are compatible.
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera to your 12mm thick screen. Learn more in Apple Support document Continuity Camera: Use iPhone as a webcam for Mac . *Important* : Requires Apple MagSafe charger to…
I have a Mac Mini as my workshop computer and use it with an old Fujitsu screen. Until Continuity Camera was available I had to use my iPhone whenever anyone FaceTimed me and now I can use my Mac AND my iPhone. Fits on an old fat framed…
Camera continuity iPhone 13 Pro holder, fits original case and LG M24md4kl-b monitor
A continuity camera holder for iPhone 12/13/14 pro (may work on others, I have not tested) with MagSafe insert specifically designed to sit on top of the Benq PD3200U. It may work on other Benq Monitors assuming they have the same side…
About this item Holds your phone at the top of your MacBook Air for use with continuity camera in iOS 16 and macOS Ventura. Designed to work with the iPhone 12 & 13 and 14 series with an Apple genuine case on. Simply rest it on the lid of…
Remix of https://makerworld.com/en/models/16169#profileId-57570 for the Samsung Odyssey OLED G8 curved monitor. Tested with an iphone 15 pro
Da das TonUINO ein deutschen Projekt von ist, werde ich die hier in deutsch schreiben. Wer sich nicht aus dem TonUINO Forum hier her verirrt hat findet dort viel Hilfe. https://discourse.voss.earth This is a german project, baucause of…
Made specifically to work with an iPhone 12 mini in a case, but may work with other phones. Slanted the phone side to add a slight pinching effect for a more secure fit. Left a notch to help position around the in-build camera, but moving…
I use it with my dbrand grip case and it fits fine, the .step file is available if you need to make any adjustments. I printed it with 10% infill and 0.2 layer height. Cheers!
As someone from a place with a huge amount of Inuk artists that make beautiful soapstone, marble and labradorite carvings, I figured I'd blend my love of printing with a little taste of my homeland. This is modeled after some of the…
