1 / 12
TonUINO 999 - Housing for the RFID Music Box TonUINO AiO — image 1
1 / 12

TonUINO 999 - Housing for the RFID Music Box TonUINO AiO

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Housing for the TonUINO RFID Music Box using the All-in-One PCB from Leiterkarten-Piraten

Rating
0 / 5
Likes
18
Downloads
91
Makes
0
Views
1,698
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Share Alike

This is a build of the TonUINO Project with the All-in-One PCB from Leiterkarten-Piraten. It's a Musicbox (not only) for Kids with a RFID reader. By holding a card on the top of the box, specific music will play. More information on the Project page…

It's a cube with a side length of 9 cm → 9x9x9

What you will need to build one:

Tools you need:

  • Hex screw drivers
  • Soldering iron ( for Speaker & Buttons)

Print Settings:

  • 0.4 mm nozzle
  • 0.2 mm layer height
  • Infill 30%
  • 3 bottom layers 
  • 2 top layers
  • 3 layer shell thickness
  • no supports

Colors:

  • Color 1: Housing & Lid
  • Color 2: Shell
  • Any Color for RFID-Clamp

For the Lid, print the first 3 layers in Color 2 !

The Screw holes of the Lid are closed for better printing without support. They can be cutted easily. There are also imcluded support rings for the button holes, which are easy to remove after printing.

For the lower Button on the right side you have to remove (unsolder / cut off) a part from the PCB:

Tags