mazda mx-5 mx5 miata roof latch button fix with adjustable screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V3 fixed some tolerances and rounded the top more to clear the mount better. V2.1 wider at the bottom and uses a M3…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 372
- Wydruki
- 0
- Wyświetlenia
- 1892
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
V3 fixed some tolerances and rounded the top more to clear the mount better.
V2.1 wider at the bottom and uses a M3 8mm countersunk screw
V2 now with extra grip
top latch fix for mazda miata mx5
i recently got a hardtop and one of the latches wouldnt stay shut so i remixed this design by Visser3 to make it more like the stock button but with a 3mm hole for a screw just like those from flyin miata.
i printed one from pla to test the model since its only 5g
it actually works better than expected even without the screw.
i would recommend to print these out of petg or abs since pla would melt and deform from the heat and sun.
i hope its usefull to you :)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12mm
Infill:
100%
Filament: 3Djake PETG black
Notes:
i printed mine just how they are but laying them on the side to avoid bad layer adhesion should probably be better :)
use tree support with thouching build plate only for easier removal of the supports.
Category: Automotive